Product Description

AISI-ASTM-201-304-316-321-904L-2205-2507-Manufacto


The alloying elements can change and personalize properties-their flexibility, strength, formability, and hardenability.As a guideline, alloying elements are added in lower percentages (less than 5%) to increase strength or hardenability, or in larger percentages (over 5%) to achieve special properties, such as corrosion resistance or extreme temperature stability. Manganese, silicon, or aluminium are added during the steelmaking process to remove dissolved oxygensulfur and phosphorus from the melt. Manganese, silicon, nickel, and copper are added to increase strength by forming solid solutions in ferrite. Chromium, vanadium, molybdenum, and tungsten increase strength by forming second-phase carbides. Nickel and copper improve corrosion resistance in small quantities. Molybdenum helps to resist embrittlement. Zirconium, cerium, and calcium increase toughness by controlling the shape of inclusions. Sulfur (in the form of manganese sulfide), lead, bismuth, selenium, and tellurium increase machinability.The alloying elements tend to form either solid solutions or compounds or carbides. Nickel is very soluble in ferrite; therefore, it forms compounds, usually Ni3Al. Aluminium dissolves in the ferrite and forms the compounds Al2O3 and AlN. Silicon is also very soluble and usually forms the compound SiO2•MxOy. Manganese mostly dissolves in ferrite forming the compounds MnS, MnO•SiO2, but will also form carbides in the form of (Fe,Mn)3C. Chromium forms partitions between the ferrite and carbide phases in steel, forming (Fe,Cr3)C, Cr7C3, and Cr23C6. The type of carbide that chromium forms depends on the amount of carbon and other types of alloying elements present. Tungsten and molybdenum form carbides if there is enough carbon and an absence of stronger carbide forming elements (i.e., titanium & niobium), they form the carbides W2C and Mo2C, respectively. Vanadium, titanium, and niobium are strong carbide forming elements, forming vanadium carbidetitanium carbide, and niobium carbide, respectively.Alloying elements also have an effect on the eutectoid temperature of the steel. Manganese and nickel lower the eutectoid temperature and are known as austenite stabilizing elements. With enough of these elements the austenitic structure may be obtained at room temperature. Carbide-forming elements raise the eutectoid temperature; these elements are known as ferrite stabilizing elements.


ASTM A312 A312m Tp316L 1mm 2mm 3mm Stainless_yythk


MaterialMonel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel Alloy
ShapeRound,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,Square,Bar,Pipe,Sheet
GradeDuplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L

Others:253Ma,254SMo,654SMo,F50(UNSS32100)F60,F61,F65,1J22,N4,N6 etc

Alloy : Alloy 20/28/31

Hastelloy:HastelloyB/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g

Hastelloy B / UNS N10001,Hastelloy B-2 / UNS N10665 / DIN W. Nr. 2.4617,Hastelloy C,

Hastelloy C-4 / UNS N06455 / DIN W. Nr. 2.4610,Hastelloy C-22 / UNS N06022 / 

DIN W. Nr. 2.4602,Hastelloy C-276 / UNS N10276 / DIN W. Nr. 2.4819,Hastelloy X / 

UNS N06002 / DIN W. Nr. 2.4665


Haynes: Haynes 230/556/188

Inconel 600/601/602CA/617/625/713/718/738/X-750,Carpenter 20

Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668,Inconel 601 / UNS N06601 / 

DIN W. Nr. 2.4851,Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856,Inconel 725 / 

UNS N07725,Inconel X-750 / UNS N07750 / DIN W. Nr. 2.4669,Inconel 600 / 

UNS N06600 / DIN W. Nr. 2.4816


Incoloy: Incoloy 800/800H/800HT/825/925/926;

GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044

Monel: Monel 400/K500/R405

Nitronic: Nitronic 40/50/60;

Nimonic: Nimonic 75/80A/90/A263 ;
Specification

Wire: 0.01-10mmStrip: 0.05*5.0-5.0*250mm 

Bar: φ4-50mm;Length 2000-5000mm

Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm

Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm

Product Characteristics
  1. According to the preparation process can be divided into deformation superalloys, 

casting superalloys and powder metallurgy superalloys.

2.According to the strengthening mode, there are solid solution strengthening type, 

precipitation strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc..

StandardGB,AISI,ASTM,DIN,EN,SUS,UNS etc
InspectionISO,SGS,BV and so on.
Application

High temperature components such as turbine blades, guide vanes, 

turbine disks, high pressure compressor disks,machine manufacturingand 

combustion chambers used in the manufacture of 

aviation,naval and industrial gas turbines

Packaging
  1. cases packed in wooden cases

  2. paper packaging

  3. plastic packing

  4. foam packagingPackaging according to customer requirements or products

Delivery7-25days orAccording to the product
Payment

L/C,D/A,D/P,T/T,Western Union,MoneyGram,According to customer requirement

spaymentsfor offline orders.

Hot Sale 1 Inch 1.5 Inch 2 Inch Stainless_yy.png


12.jpg

Due to the many great features of stainless steel, it is widely used in many industries. It includes constructions, home appliances, automobiles, kitchen accessories, mechanical structure, decoration engineering, chemical industry, etc. Let's have a brief review.

1. Construction & Buildings

It is an essential building material widely used in commercial buildings, bridges, airports, etc. The most common uses include structural frames, roofing, wall panels, claddings, door panels, backsplash, handrailings, ceilings, elevator hall, inner panels of elevators, etc. Also, it is perfect for making handicrafts.

2. Automobile

Different grades of stainless steel can be used to manufacture car bodies, grills, trims, wheel axles, bearings, vehicular exhaust, fuel tanks, etc.

3. Industrial Uses

Stainless steel is ideal for transporting chemicals, liquids, etc. It is typical for medical uses, gas and oil industries, such as pipelines and tubes, blades, operation tables, pumps, processing or storage tanks & vessels, etc.

4. Household Appliances 

About 75% of household appliances are made of stainless steel, including internal panels of cookers, heaters, ovens, burners, conveyors, grills, television, washing machine, refrigerator, kitchen hardware, etc.

5. Furniture & Daily Uses

Stainless steel coil and sheet are also versatile in our daily life, such as trash cans, screens, benches, tables, beds, bookshelves, advertising boards, display stands, etc.

AISI-ASTM-201-304-316-321-904L-2205-2507-Manufacto

13.jpg

AISI-201-304-304L-316-316L-904L-2205-2507-No-1-2b-

AISI 201  304 304L 316 316L 904L 2205_yythkg.jpg



Message

Submit

Products Recommended